All Categories
Featured
Table of Contents
That window can send more solar heat in winter than in summertime. A west-facing window on a summer season's afternoon has an angle of occurrence from near 0 up to 30 with a big effective location of solar radiation. A north-facing window, in summertime, has a high angle of incidence and a low efficient location of solar radiation, so can transmit less heat than a west-facing one.
You can rapidly and quickly enhance the thermal efficiency of your house by changing your windows. There are thousands of types of glass and frames to choose from.
Single glazing with clear glass is not very effective when it comes to heat loss or gain. To improve efficiency, you can use single glazing with a more energy-efficient type of glass such as low emissivity (low-e) glass.
The energy performance of IGUs also depends on: the residential or commercial properties of each layer of glass. Various glass types (for example, clear and low-e glass) can be put together in an IGU.
IGU cavities can be filled with air or a more inert, low-conductivity gas such as argon the width of the cavity. Broader cavities supply lower (much better) U worths, with 12mm typically accepted as the preferred space how well the cavity is sealed.
If argon is installed to the cavity in place of air, wetness is reliably excluded the level of desiccant (drying representative). The spacer (metal or polymer strip) that separates the glass layers includes a desiccant to take in any moisture. Insufficient desiccant might cause moisture to condense on the glass surface area in cold conditions, minimizing thermal performance.
In truth, IGUs can provide better energy efficiency for all environments, especially in heated and air-conditioned houses. Cross-section detail of single, double and triple-glazing units Low emissivity glass (frequently referred to as low-e glass) reduces heat transfer. Low-e glass might be either high or low transmission: High transmission low-e glass has a finish that allows daylight from the sun to pass into your home to attain great solar heat gain, however reduces the quantity of the long wavelength infrared heat that can escape back through the window.
Low-e glass has either a pyrolytic covering or a vacuum-deposited thin movie metal coating. Pyrolytic coverings are long lasting and can be used for any glazing; vacuum-deposited finishes are soft and are only used within IGUs. Low-e finishings can significantly enhance both U worth and SHGC; nevertheless, they need to be utilized properly or they will either deteriorate or fail to perform as needed.
Low-e coatings can be used in combination with clear, toned or reflective glass. Low-e coverings on glazing can lower heat transfer where required Image: Department of Market, Science, Energy and Resources Toned glass has colouring additives included throughout manufacture. It is offered in various colours, normally bronze, grey, blue and green.
Table of Contents
Latest Posts
Does Double Glazing Reduce The Heat In Brisbane's Summer? in Spearwood Western Australia
Save Energy With Double Glazed Windows in Hocking WA
Triple Glazing – Pros & Cons in Ocean Reef Western Australia
More
Latest Posts
Does Double Glazing Reduce The Heat In Brisbane's Summer? in Spearwood Western Australia
Save Energy With Double Glazed Windows in Hocking WA
Triple Glazing – Pros & Cons in Ocean Reef Western Australia